Arctic

1. Prepare clean, dry nails and remove surface dust. Follow the preparation requirements of your chosen gel system.
2. Apply a compatible base coat and complete its specified curing cycle.
3. Apply a thin, even layer of colour gel, avoiding the cuticles and surrounding skin. Cure as directed.
4. If another colour layer is needed, apply it thinly and cure it separately.
5. Apply a compatible top coat and complete its specified full curing cycle.

Use a lamp compatible with this product and follow the product-specific curing instructions for every layer. Follow the specified removal method; do not peel or force gel from the nail.

Acrylates Copolymer; HEMA; Dimethicone; Microcrystalline Wax; Mica; C.I. 15880; C.I. 77491; C.I. 77492; C.I. 77891; C.I. 77163; C.I. 77007; C.I. 77266; Hydroxypropyl methacrylate; Trimethylbenzoyl Diphenylphosphine Oxide.

TENTEU provides product-specific safety information to help you choose and use our nail products with confidence. Safety Data Sheets (SDS/MSDS) are available for this range, covering ingredient disclosures, safe handling and storage. Contact us for safety information relevant to your chosen product.

Safe application

Contains HEMA and TPO. Intended for non-EU markets. This product may cause an allergic skin reaction and irritation to the skin, eyes or respiratory tract. Avoid contact with skin and eyes, and use with adequate ventilation. Do not inhale vapour or mist, swallow, heat or spray the product. If uncured gel contacts skin, wash immediately with plenty of water and soap; do not cure it on the skin. Stop use and seek medical advice if symptoms occur. For eye contact, rinse immediately with plenty of water for at least 15 minutes and seek immediate medical attention. If swallowed, do not induce vomiting; seek immediate medical attention. Keep out of reach of children.

Storage & disposal

Store tightly closed in a cool, dry place at or below 30°C (86°F), away from sunlight, curing lamps, heat and ignition sources. Do not pour unused gel into drains.